Displays the configured health check LAGs on a switch.
This command has no arguments or variables.
N/A.
Use this command to display the health-check LAGs that have been configured on the switch.
The following is sample output from this command:
# show sharing health-check Member Agg Admin Track Track Group Port Mbr State IP Addr TCP Port Miss Freq State Dn Up ================================================================================ 2:8 2:1* Y En 30.1.1.1 23 3 3 Up 0 1 2:2* Y En 30.1.1.2 23 3 3 Up 0 1 2:3* Y En 30.1.1.3 23 3 3 Up 0 1 2:8* - En 30.1.1.8 80 3 10 Down 0 0 2:11* Y - - - - - - - - 2:12* - En 44.1.3.2 80 3 4 Down 0 0 2:16 - En 30.1.1.16 80 3 10 Dis 0 0 2:20 2:20* Y En 192.1.1.1 80 10 3 Up 0 1 2:21* Y En 192.1.1.2 80 10 3 Up 0 1 ================================================================================ Member Port Flags: (*)Active, (!) Disabled
This command was first available in ExtremeXOS 12.13.
This command is available on all Universal switches supported in this document.